Ferro Silicon Barium Mold Powder Grades for Continuous Casting | Bright Alloys

Ferro Silicon Barium Mold Powder for Continuous Casting

High-performance inoculants including FeSiBa Mold Powders (1-2%, 2-3% Ba),iron foundries and continuous casting applications

FeSiBa Inoculant Mold Powder Products

ferro silicon barium mold powder with barium content 1-2% size 0-0.3mm particle appearance showing fine particle texture,silver-gray color and metallic sheen - Bright Alloys

FeSiBa Mold Powder 1-2%

Mold powder grade with 1-2% Ba, 65-72% Si, optimized for continuous casting

  • Improves casting surface quality
  • Enhanced mold lubrication properties
  • Controlled melting characteristics
View Mold Powder 1-2% Inquire
ferro silicon barium mold powder, Ba 2-3%, size 0-0.3mm, fine silver-gray particles with metallic sheen - Bright Alloys
Specialty

FeSiBa Mold Powder 2-3%

Premium mold powder with 2-3% Ba, 65-72% Si, high-performance formulation

  • Optimized for thin slab casting
  • Reduces sticker breakouts
  • Consistent heat transfer
View Mold Powder 2-3% Inquire
Custom FeSiBa inoculant powder and particles: Si 60-72%, Ba 0.5-6%, Ca 0.6-3%, sizes 0-0.3mm to 3-8mm for gray iron - Bright Alloys
Custom Formulation

Custom FeSiBa Mold Powder

Chemical composition and physical properties precisely tailored to your continuous casting parameters

  • Customize Ba, Si, Ca, Al, and other element ratios based on your steel grade and casting speed
  • Adjustable melting temperature and viscosity for optimal mold lubrication
  • Tailored particle size distribution to control heat transfer and powder consumption
  • Formulated to improve surface quality and reduce oscillation marks
  • Developed in collaboration with your team to match specific caster conditions
Request Technical Consultation

Different Inoculants and Mold-Powders Comparison

GradeSi (%)Ba (%)Ca (%)Al (%)Mn (%)Typical use
FeSiBa Mold Powder 1-2%65-701.0-2.01.0-3.0≤1.5≤0.4Continuous casting mould flux and steel refining
FeSiBa Mold Powder 2-3%65-702.0-3.01.0-3.0≤1.5≤0.4High-fluidity mould fluxes for special steels
Custom FeSiBa Mold PowderOn requestOn requestOn requestOn requestOn requestTailored flux behaviour and particle size

What Is Ferro Silicon Barium Mold Powder?

FeSiBa mould powder is a fine barium-bearing ferrosilicon powder used as a mould flux and slag conditioner in continuous casting, where it lubricates the strand, stabilises heat transfer and helps absorb inclusions.

Bright Alloys supplies it at 0-0.3 mm, 0-1 mm and 20-200 mesh, with Ba 1-2% and 2-3% for different casting speeds and steel grades.

Applications and Performance

Continuous Casting Mould Flux

The powder melts to form a lubricating slag film that stabilises heat transfer in the mould and reduces sticker alarms and surface defects.

Steel Refining and Slag Conditioning

FeSiBa additions adjust slag fluidity and deoxidise the steel bath, supporting inclusion removal ahead of the caster.

Special Cast Iron Inoculation

Outside steel plants the same fine grade is used to inoculate special cast irons where a fast-dissolving powder is required.

Why Choose Bright Alloys FeSiBa Mold Powder

Technical Support & Services

🔬

Technical Consultation

Our metallurgical experts provide application guidance and technical support for optimal alloy selection and usage.

📊

Custom Formulations

We develop tailored alloy compositions to meet specific customer requirements and application needs.

🚚

Logistics Solutions

Efficient global supply chain management ensuring timely delivery and optimal packaging for product integrity.

Can't Find What You're Looking For?

We specialize in custom alloy formulations. Contact us with your specific requirements for a tailored solution.

Request Custom Alloy

Ferro Silicon Barium Mold Powder FAQs

What are the differences between FeSiBa Mold Powder 1-2% Ba and 2-3% Ba? +

The FeSiBa Mold Powder 1-2% Ba provides good lubrication and is suitable for most continuous casting applications, while the 2-3% Ba grade offers enhanced fluidity and is ideal for thin slab casting and higher speed operations. Choose based on your steel grade and casting speed requirements.

What particle size distributions are available for mold powder? +

We offer standardized granulations such as 0-0.3mm (fine powder) and 0.1-1.0mm (granules). Custom particle sizes like 0.1-0.7mm are also available upon request. Visit our FeSiBa Mold Powder 1-2% page for detailed specs, or contact us for customized distributions.

How can I get a quotation for ferro silicon barium mold powder? +

Contact our sales team via the inquiry form or email us at info@brightalloys.com. Please specify the desired barium content (1-2% or 2-3%), particle size, and quantity for an accurate price quote.

Do you provide custom mold powder formulations? +

Yes, we offer custom FeSiBa inoculant powders with adjustable Ba (0.5-6%), Si (60-72%), Ca (0.5-3%), and tailored particle size distributions. Learn more on our premium mold powder page or request a technical consultation.

What quality certifications does Bright Alloys hold? +

Bright Alloys is ISO certified and our ferro silicon barium mold powder is produced under strict quality control. Each batch comes with a Certificate of Analysis (CoA). For more details, visit our Quality Control page.

Online Chat

Lily
Hello! How can i assist you today?
WhatsApp us now! Call us now! Email us now! Wechat